BETTER PARTS Machinery Co., Ltd. bbonniee@163.com 86--13535077468
Ürün Ayrıntıları
Menşe yeri: Çin
Marka adı: REXROTH
Sertifika: CE ISO 9001
Model numarası: A2FM serisi
Ödeme ve Nakliye Şartları
Min sipariş miktarı: 1
Fiyat: nigotiation
Ambalaj bilgileri: Standart ahşap
Teslim süresi: 7 gün
Ödeme koşulları: T/T
Yetenek temini: 2000/ay
Standart veya standart dışı: |
Standart |
Performans: |
Korozyon direnci |
Malzeme: |
dökme demir |
Yerinden etme: |
Standart, 10 ila 1000 |
Motorlu Tip: |
Pistonlu motor |
Garanti: |
1 yıl |
Durum: |
YENİ |
Satış sonrası servis sağlandı: |
çevrimiçi destek |
Kullanım: |
Yağ |
Uygulama: |
Diğer |
Yakıt: |
hidrolik yağı |
Güç: |
Hidrolik |
Basınç: |
Yüksek basınç, düşük basınç |
Ağırlık: |
22-160kg |
Özellik: |
Yüksek verimlilik |
İsim: |
Hidrolik eksenel piston pompası |
Standart veya standart dışı: |
Standart |
Performans: |
Korozyon direnci |
Malzeme: |
dökme demir |
Yerinden etme: |
Standart, 10 ila 1000 |
Motorlu Tip: |
Pistonlu motor |
Garanti: |
1 yıl |
Durum: |
YENİ |
Satış sonrası servis sağlandı: |
çevrimiçi destek |
Kullanım: |
Yağ |
Uygulama: |
Diğer |
Yakıt: |
hidrolik yağı |
Güç: |
Hidrolik |
Basınç: |
Yüksek basınç, düşük basınç |
Ağırlık: |
22-160kg |
Özellik: |
Yüksek verimlilik |
İsim: |
Hidrolik eksenel piston pompası |
| Size | 5 | 10 | 12 | 16 | 23 | 28 | 32 | 107 | 125 | 160 | 180 | 200 | 250 | 355 | 500 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Displacement geometric, per revolution (cm³) | 4.93 | 10.3 | 12 | 16 | 22.9 | 28.1 | 32 | 106.7 | 125 | 160.4 | 180 | 200 | 250 | 355 | 500 |
| Nominal pressure (bar) | 315 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 350 | 350 | 350 |
| Maximum pressure (bar) | 350 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 400 | 400 | 400 |
| Maximum speed (rpm) | 10000 | 8000 | 8000 | 8000 | 6300 | 6300 | 6300 | 4000 | 4000 | 3600 | 3600 | 2750 | 2700 | 2240 | 2000 |
Fixed motor with axial tapered piston rotary group of bent axis design, for hydrostatic drives in open and closed circuits. For use in mobile and stationary application areas. The output speed is dependent on the flow of the pump and the displacement of the motor. The output torque increases with the pressure differential between the high and low pressure sides and with increasing displacement.
| A2FM5/60WPBB030 | A2FM5/60WPBB030J | A2FM5/60WPCB030 | A2FM5/60WPCB030J |
| A2FM5/60WVBB030 | A2FM5/60WVBB030J | A2FM5/60WVCB030 | A2FM5/60WVCB030J |
During commissioning and operation, the axial piston unit must always be filled with hydraulic oil and vented with air. The above precautions must also be observed after a relatively long period of inactivity, since the axial piston unit may drain hydraulic oil back into the tank via the hydraulic line.
Especially in the "transmission shaft up" installation position, oil filling and exhaust must be carried out thoroughly, otherwise there will be dangers such as oil-free operation.